i have a lot of poison ivy in my yard.Some vines are old growth ,6 inches thick.A lot of ground level growth also.My question is this: Can i plant anthing that will push out the poison ivy,or how is the best way to kill it and keep it gone? Thanks
Yard over run with poison ivy?
The best and simplest way to eradicate poison ivy/poison oak is to apply "TRICLOPYR". You can purchase this product at most hardware/garden shops being sold as "Bayer Advanced Brush and Shrub Killer" or "Ortho Brush-B-Gone". Triclopyr was developed to control hard-to-kill brush species and kills only broad-leaved plants. It acts in the same manner as Roundup but does a better job. It will not harm your lawn but please use with caution when spraying around your ornamental plants and vegetables. Also.....do not apply this product when temperatures exceed 80 degrees...so it's advisable to spray during the early morning hours when winds are not a problem as well.
Simply mix and spray and you should begin to see the poision ivy show symptoms of decline within 7 to 10 days. If you happy to see any re-growth, spray it again.
Note: Try adding about a tablespoon of dishsoap per gallon of water AFTER you've mixed the Triclopyr with water. The addition of dishsoap will help make the solution adhere better and allow more to penetrate the leaves/stems of the poison ivy.
Any leftover product can be used to control your broadleaved weeds on your lawn.
Hope this helps solve your problem. GOOD LUCK!
-Certified Professional Crop Advisor with over 30 years of experience and a Degree in Plant Science
Reply:you have to chop out what you can and spray the rest.
Reply:spray it with vinigar ...
Reply:Poison Ivy Control
Heed all warnings. Check with your physician if you
have any concerns regarding your personal health risk.
Revised by Tom Ellis, M.S., Department of Entomology
Poison ivy (Toxicodendron radicans) is found in nearly
every part of Michigan. lt is known by several different
names, such as three-leaved ivy, poison creeper, climbing
sumac and poison oak. Although it can grow as a self
supporting, erect woody shrub, its usual growth habit is
as a slender vine running along the ground, or growing on
shrubs and trees. The vines can grow to several inches in
diameter over a period of years.
Poison ivy has three leaflets occurring alternately
along the stem. Leaflets are usually smooth, but may be
either a dull or glossy green. Leaf margins (edges) can
be smooth, toothed, and/or lobed. Leaves on the same vine
often have a number of color and leaf margin
combinations. It is possible, however, that all leaves on
a vine will have the same general character. Because
there are no distinguishing characteristics to warn an
unsuspecting individual that a vine is poison ivy, the
old saying of "leaflets three, let it be" should be
remembered. (Vis. 1)
The flowers of poison ivy are typically inconspicuous
and arise in clusters above the leaves. The berrylike
fruit has a smooth waxy appearance and is gray to white
in color. After the leaves drop in the fall, the berries
are a distinct identifier the poison ivy plant. As a vine
climbs shrubs and trees, it produces numerous "aerial
roots" which attach to the tree or shrub. The "aerial
roots" give the vine a characteristic appearance often
described as looking like a "fuzzy rope."
Poison ivy plants produce an oil called urushiol,
which is usually capable of causing severe skin
irritations the year around. There is always the
potential of transferring some of the oil present in the
leaves, stems, fruit, roots or flowers of the poison ivy
plant to the skin Although contact with the plan is
normally the method of exposure, an individual can also
be exposed by handling clothing, tools, objects or
animals which have become contaminated with the oil or by
smoke from burning the plants.
Two general methods of control of poison ivy are
culture and chemical. Cultural methods should not be
attempted unless the individual is tolerant to poison
ivy. Individual sensitivity to poison ivy varies greatly.
Natural immunity is originally present in all persons,
but is lost after the first contact with the oil.
Subsequent contact with the oil will result in skin
irritation, although severity of the reaction may vary.
Therefore, always take care when attempting to eradicate
this plant. Individual must also be careful when us in
chemical methods so that desirable plants are not
mistakenly killed or injured. ALWAYS READ AND FOLLOW
LABEL INSTRUCTIONS FOR ANY HERBICIDE USED AROUND THE
HOME.
Burning is not a recommended method for eradication.
Burning produces soot particles which carry the oil into
the air. Individuals coming in contact with the smoke
will experience severe cases of poisoning. Poison ivy can
usually be dug out when the soil is wet and there are
only a few plants. However, attempts to remove roots from
dry soil are futile. Pieces of root remaining in the soil
may sprout and replace the original plants. Plowing is
also of little value, since the disturbed root systems
will sprout. Repeated cutting of the plant back to the
ground surface will eventually starve the root system
and the plant will die. However, repeated cutting
increases the chances of exposure to the toxic oil.
Several herbicides are effective in the control of
poison ivy. Most of the products listed in this bulletin
can be found in premixed or easily used formulations at
local home and garden centers. Other chemical products
will control this plant, but may not be registered for
use around the home and are designated as Restricted Use
products (RUP). If these chemicals are required, contact
your local county Extension office for procedures on
becoming a certified application and for the location of
a local commercial pesticide distributor for product
availability.
There are numerous company and store brand names for
the herbicides which control poison ivy. The label on
each product will list the name of the active ingredient
and its concentration. If the chemical will control
poison ivy, it will be stated on the label. The label
should list poison ivy and give the proper rate to be
applied, along with other details on proper application
procedure. Several commonly used herbicides that control
poison ivy are: Glyphosate, Amitrole, 2,4.D, Triclopyr
Other chemical products may also be used to control
poison ivy. Although they may not be registered for
residential use, they are available for use in other
situations, such as along fence rows, in fields, or in
wooded areas. These products include dicamba (Banvel),
hexa-zinone (Velpar), 2,4-D ester + 2,4-Dp ester,
picloram (Tordon), and sulfometuron methyl (Oust).
For specific recommendations on the use of these
chemicals, contact your local county Extension office,
found under local government in the phone book
This information comes from Michigan State University
Extension bulletin E-1517, Poison Ivy Control.
Reply:Kudzu takes over and klills anything standing in it's path!
I would chop it all down, and dig up what roots you can, place a tarp over the area to kill out the leftovers..good luck
Reply:It seems you are getting more information than you may have asked for.. I would prepair a "baggie" or similar container with a few ounces of weed killer , i.e. Round Up, or whatever your hardware store guy recommends. Wearing gloves, cut a limb (flexible so you can move it around) and stick it in the baggie filled with a few ounces of weed killer. tape it to the cutting to keep your animals out. You get the idea, to let the plant(s) draw from the bag of weed killer. Worked for me.. good luck
Reply:spray round up at the roots. poison ivy is very persistant so you may need to spray it more than once.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment